rxyan2@wm.edu
Final ProjectCapacitance Meter
Design due on Gradescope by 2:00 p.m., one week after the design lab.
Project report due on Gradescope by 5:00 p.m., 16 days after the design lab.
Overview
Your circuit should be able to measure capacitance in the range from 10 to 100 nF. I suggest using a potential difference (voltage) as the output of your device, that is, building a C to V converter.
Requirements
- You may use any other discrete components that we studied in the class.
- The final product can use a multimeter in voltmeter, ammeter or ohmmeter settings. The multimeter must be used in its DC settings.
- The number we read on the multimeter does not need to show capacitance. After referring to a calibration plot or table, we should be able to deduce the capacitance.
- Feel free to use Multisim to test and confirm your derivations. However, Multisim by itself does not prove anything! We need to see the conceptual ideas and derivations.
What you may not use
- an oscilloscope;
- a function generator;
- a multimeter in its capacitance meter setting.
You may use the items above during prototyping and debugging, but not in the final circuit.
Help
We will not give you a design of the final circuit, but you may check your ideas with us. We will help you make your circuit design work, but debugging is on your own. If you have a working design that is expected to perform correctly, we may give you one "debug" opportunity.
Proof of work
Make sure an instructor (not a TA) signs your logbook before you leave the lab room, at the end of each lab day in both project weeks.
Groups
- In the first week, you work in a group of 1 or 2 students, with at most one group of 3 (only if the class has an odd number of students). See the weekly seating groups. You do not form your own groups.
- In the second week, everyone builds their own circuit: one student, one circuit.
Time frame
- You complete the design with a partner in the first week. This is Lab 12.
- You submit your circuit design to Gradescope, with an explanation of the overall idea, by 2:00 p.m. one week later.
- You build your own circuit in the second week. Nobody but you, the instructors or the TAs may touch your circuit. This is Lab 13. You begin at 2:00 p.m. and stop at 5:00 p.m.
- You submit the final report by 5:00 p.m., 16 days after the design lab. See "Final written report" under Grading for details.
Grading
This project is 25% of your total grade.
Circuit design (20 points)
The instructors give feedback on the feasibility of your design before Lab 13 starts.
Circuit building and debugging (40 points)
A working hardware prototype, built within the 3-hour time frame in the second week, that deduces capacitance within an order of magnitude of the actual values.
Final written report (40 points)
Keep the report concise: 3 pages at most, font size 14 pt (plus space for the circuit diagrams and logbook attachments). Attach your logbook pages signed by an instructor (not a TA) as proof of work.
- (20 points) Description of the design ideas: how it works, and which basic circuits it uses and in what regimes. The final circuit diagram with component values and explanations of the conceptual blocks. Show relevant Multisim simulations.
- (10 points) Description of the test procedures, and the calibration data in graphical form.
- (10 points) Measure 5 mystery capacitors within 10% of their real values. Show the measured or deduced values in the report.